- 영문명
- Comparison of the Correction Methods for Gamma Ray Attenuation in the Radioactive Waste Drum Assay
- 발행기관
- 한국방사성폐기물학회
- 저자명
- 지영용 유영걸 곽경길 강덕원 김기홍
- 간행물 정보
- 『Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT)』Vol.4 No.3, 275~284쪽, 전체 10쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2006.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

국문 초록
실제 드럼 내에 존재하는 핵종으로부터 방출되는 감마선을 외부에서 측정하여 그로부터 드럼 내 핵종의 양을 정확하게 분석하기 위해서는 먼저 적절한 교정표준의 선택과 드럼 내 매질의 밀도와 핵종의 분포에 대한 감마선 감쇠보정이 반드시 필요하다. 본 연구에서는 드럼 내 핵종의 분석을 위하여 밀도가 다른 두 개의 모델드럼을 이용하였으며 전송선원으로써는 152Eu(10 mCi), 표준선원으로는 혼합선원(133Ba, 137Cs, 60Co)을 이용하였다. 그리고 드럼과 검출기 사이의 거리를 달리하면서 모델드럼 내의 표준선원으로부터 나오는 감마선을 계측하여, 감쇠보정이 되지 않은 이 측정값에 3 종류의 감마선 감쇠보정을 각각 수행하였다. 그 결과 밀도가 낮은 드럼에서의 오차는 10 % 이하이었고, 밀도가 높은 드럼에서의 오차는 25 % 이하이었다. 또한 드럼과 검출기 사이의 거리가 근거리(70 cm, 드럼구획: 10 segments)일 때, 오차는 원거리(90 cm, 드럼구획: 8 segments)에서의 오차보다는 낮았는데 이는 상대적으로 1 segment에 대한 부피차이에 기인한 밀도 측정오차가 낮고 감마선의 산란이 낮았기 때문이다.
영문 초록
In the measurement of gamma rays emitted from the nuclide in the radioactive waste drum, to analyze the nuclide concentration accurately, it is necessary to use the proper calibration standards and to correct for the attenuation of the gamma rays. Two drums having a different density were used to analyze the nuclide concentration inside the drum in this study. After carrying out the system calibration, we measured the gamma rays emitted from the standard source inside the model drum with changing the distance between the drum and the detector. The measured values were corrected with the three kinds of gamma attenuation correction methode, as a results, the error was less than 10 % in the low density drum and less than 25 % in the high density drum. The measured activity in the short distance was more accruable than in the long distance. The transmission correction for the mass attenuation showed good results(very low error) compared to the mean density and the differential peak correction method.
목차
키워드
해당간행물 수록 논문
- 벤토나이트 콜로이드로의 우라늄(VI) 수착에 대한 실험적 연구
- 설계 모델을 이용한 UO2 펠릿 20 kg HM/batch용 분말화 장치 제작
- 목 건식저장용기에 대한 전복해석의 검증시험
- 한국형 기준 처분 환경에서의 PWR 사용후핵연료 처분용기의 구조적 안전성 해석
- 방사성폐기물드럼 핵종분석에서 감마선 감쇠보정 방법들의 비교 평가
- Product Consistency Test(PCT)와 Vapor Hydration Test(VHT)를 이용한 모의 방사성폐기물 유리고화체의 화학적 내구성 평가
- 연구로 2호기 중성자 조사 흑연의 Wigner 에너지 방출 특성 연구
- Hot Cell 내에 오염된 고방사능분진 제거를 위한 사이클론 개발 및 성능평가
- 디지털 목업 시스템을 이용한 해체 시나리오 평가용 해체공정 평가모듈 개발
- 사용후핵연료 관리 정책과 국제 동향
참고문헌
관련논문
공학 > 공학일반분야 BEST
- 중학생들의 인공지능 관련 사회-과학쟁점 토론에서 나타난 논증 특징과 인식
- 배터리전기차 화재대응방법 및 절차에 대한 제안
- 구조방정식 모형을 활용한 교과 문해력 함양과 복합양식 텍스트 독서 연구
공학 > 공학일반분야 NEW
- Sorption of Eu(III) Onto MX-80 and Granite in Ca-Na-Cl Solutions
- Comparison of Optimization Algorithms for Fracture Parameters Estimation of Spent Nuclear Fuel Cladding With Reoriented Hydride
- Investigation of the Effect of Wear and Oxidation on the Fatigue Strength Degradation of Zircaloy Cladding Tubes for Spent Nuclear Fuel
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!
