- 영문명
- The Development and Performance Evaluation of a Cyclone to Remove Hot Particulate from a Contaminated Hot Cell
- 발행기관
- 한국방사성폐기물학회
- 저자명
- 김계남 원휘준 최왕규 정종헌 오원진 박진호
- 간행물 정보
- 『Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT)』Vol.4 No.3, 217~226쪽, 전체 10쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2006.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

국문 초록
원자력연구소 핫셀의 구조와 오염특성이 조사되었다. SEM 측정결과 핫셀 내부에 부착된 고방사능 분진의 크기는 0.2~10 ㎛이었다. 사이클론의 최적 Vortex finder의 길이는 49 mm이고, 모의입자 유입속도는 15m/sec가 적합했다. 이때 3㎛의 포집효율은 약 85%였다. 모의입자 유입속도가 15m/sec보다 빠를 때, 포집효율의 증가율은 크지 않았다. 유입가스의 온도가 증가할 때, 포집효율은 약간 감소했다. Vortex finder의 길이가 증가할수록 사이클론내의 압력강하는 커졌다. Cut size diameter는 Reynolds number의 증가와 함께 감소했다. 측정된 Reynolds number에 근거하면, 사이클론 내부는 난류이고 이 난류는 사이클론 내의 압력강하에 원인이 된다고 사료된다. 는 Re 값의 증가와 함께 감소하고, Re의 값이 커질 때에서 일정한 값에 수렴했다. 즉, 6000~8000의 Re에서 는 약 0.045를 나타냈다.
영문 초록
The structural and contamination characteristics of hot cells at KAERI were investigated. The SEM results showed that the size of the hot particulate on the inner surface of the hot cell ranged from 0.2 to 10 . It was found that an inlet flow rate of 15 m/sec was suitable for this developed cyclone with a 49 mm optimum vortex finder length. The results showed that the collection efficiency was about 85% for 3 particles. The collection efficiency didn't show a sharp increase when the inlet flow rate was faster than 15m/sec. When the temperature of the inlet flow gas was increased, the collection efficiency of the cyclone was slightly decreased. The larger the vortex finder length was, the higher the pressure drop in the cyclone was. The cut size diameter decreased with an increment of the Reynolds number. It was established that the flow in the cyclone was a turbulent flow on the basis of the Reynolds number and this turbulent flow caused a pressure drop in the cyclone. decreased with increasing values of the Reynolds number and it gradually approached a constant value at a higher value of the Reynolds number. Namely, approached approximately 0.045 between 6000 and 8000 of the Reynolds number.
목차
키워드
해당간행물 수록 논문
- 벤토나이트 콜로이드로의 우라늄(VI) 수착에 대한 실험적 연구
- 설계 모델을 이용한 UO2 펠릿 20 kg HM/batch용 분말화 장치 제작
- 목 건식저장용기에 대한 전복해석의 검증시험
- 한국형 기준 처분 환경에서의 PWR 사용후핵연료 처분용기의 구조적 안전성 해석
- 방사성폐기물드럼 핵종분석에서 감마선 감쇠보정 방법들의 비교 평가
- Product Consistency Test(PCT)와 Vapor Hydration Test(VHT)를 이용한 모의 방사성폐기물 유리고화체의 화학적 내구성 평가
- 연구로 2호기 중성자 조사 흑연의 Wigner 에너지 방출 특성 연구
- Hot Cell 내에 오염된 고방사능분진 제거를 위한 사이클론 개발 및 성능평가
- 디지털 목업 시스템을 이용한 해체 시나리오 평가용 해체공정 평가모듈 개발
- 사용후핵연료 관리 정책과 국제 동향
참고문헌
관련논문
공학 > 공학일반분야 BEST
- 중학생들의 인공지능 관련 사회-과학쟁점 토론에서 나타난 논증 특징과 인식
- 배터리전기차 화재대응방법 및 절차에 대한 제안
- 구조방정식 모형을 활용한 교과 문해력 함양과 복합양식 텍스트 독서 연구
공학 > 공학일반분야 NEW
- Sorption of Eu(III) Onto MX-80 and Granite in Ca-Na-Cl Solutions
- Comparison of Optimization Algorithms for Fracture Parameters Estimation of Spent Nuclear Fuel Cladding With Reoriented Hydride
- Investigation of the Effect of Wear and Oxidation on the Fatigue Strength Degradation of Zircaloy Cladding Tubes for Spent Nuclear Fuel
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!
