- 영문명
- Performance of High Temperature Filter System for Radioactive Waste Vitrification Plant
- 발행기관
- 한국방사성폐기물학회
- 저자명
- 박승철 황태원 신상운 하종현 김혜숙 박소진
- 간행물 정보
- 『Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT)』Vol.2 No.3, 201~209쪽, 전체 9쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2004.09.30
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

국문 초록
파일럿 규모의 유리화 플랜트에서 일련의 시험을 통해 고온 세라믹 캔들 필터 시스템의 주요 운전 변수 및 성능을 평가하였다. 실증 시험결과 매 시험초기에는 필터 표면 먼지층(Dust cake)의 생성으로 인해 필터 매질에 걸리는 차압이 급격히 상승하였다. 그런 다음 차압은 곧 일정한 범위에서 안정되었고, 표면유속(Face velocity)에 비례하여 계속적으로 변화하였다. 이와 반대로, 필터 투과율(Permeability)은 매시험 초기에 급격히 감소하였다. 필터표면 먼지의 역세정은 공기압 3~5 bar 범위일 때 효율적이었다. 필터 입구 및 출구에서 동시에 등속으로 채취한 먼지농도를 바탕으로 필터의 먼지 포집율(Dust collection efficiency)을 평가한 결과 필터 성능은 설계값인 99.9%과 같은 것으로 나타났다. 100시간의 장기시험을 포함한 일련의 실증시험을 수행하는 동안 고온 필터 시스템의 성능에 영향을 주는 특별한 문제점은 발견되지 않았다.
영문 초록
Important operation parameters and performance of a high temperature ceramic candle filter system were evaluated through a series of demonstration tests at a pilot-scale vitrification plant. At the initial period of each test, due to the growth of dust cake on the surface of ceramic candles, the pressure drop across the filter media increased sharply. After that it became stable to a certain range and varied continuously proportion to the face velocity of off-gas. On the contrary, at the initial period of each test, the permeability of filter element decreased rapidly and then it became stable. Back flushing of the filter system was effective under the back flushing air pressure range of 3 5 bar. Based on the dust concentrations measured by iso-kinetic dust sampling at the inlet and outlet point of HTF, the dust collection efficiency of HTF evaluated. The result met the designed performance value of 99.9%. During the demonstration tests including a hundred hour long test, no specific failure or problem affecting the performance of HTF system were observed.
목차
키워드
해당간행물 수록 논문
- 유도가열식 저온용융로를 이용한 혼합모의 방사성폐기물의 유리화 공정 특성
- 방사성폐기물 유리화 공정 및 유리고화체 특성
- 원자력시설의 사고시 가축의 공기 흡입과 토양 섭취가 육류의 방사능 오염에 미치는 영향
- LiCl-Li2O 용융염계에서의 리튬의 반연속적 전기정련
- 방사성폐기물 유리화플랜트 고온여과시스템의 성능특성
- 영광 3&4와 5&6호기에서 액체 방사성폐기물 처리방법의 비교
- 사용후핵연료 처리를 위한 ACP 핫셀의 정상운영 및 사고시 방사선 환경영향평가
- 사용후핵연료 차세대관리 공정장치 유지보수용 천정이동 서보 매니퓰레이터 와이어 구동부 동작특성
참고문헌
관련논문
공학 > 공학일반분야 BEST
- 중학생들의 인공지능 관련 사회-과학쟁점 토론에서 나타난 논증 특징과 인식
- 배터리전기차 화재대응방법 및 절차에 대한 제안
- 구조방정식 모형을 활용한 교과 문해력 함양과 복합양식 텍스트 독서 연구
공학 > 공학일반분야 NEW
- Sorption of Eu(III) Onto MX-80 and Granite in Ca-Na-Cl Solutions
- Comparison of Optimization Algorithms for Fracture Parameters Estimation of Spent Nuclear Fuel Cladding With Reoriented Hydride
- Investigation of the Effect of Wear and Oxidation on the Fatigue Strength Degradation of Zircaloy Cladding Tubes for Spent Nuclear Fuel
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!
