- 영문명
- Solidification of Molten Salt Waste by Gel-Route Pre-treatment
- 발행기관
- 한국방사성폐기물학회
- 저자명
- 박환서 김인태 김환영 유승곤 김준형
- 간행물 정보
- 『Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT)』Vol.3 No.1, 349~357쪽, 전체 9쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2005.03.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

국문 초록
본 연구는 사용후 핵연료의 금속전환 공정에서 발생되는 폐용융염을 고형화하는 방법으로 GRSS(Gel-Route Stabilization/Solidifcation) 개념을 이용한 전처리법을 제안하였다. Sodium silicate와 H3PO4로 구성된 물질계에서는 SiO2에 의해 형성되는 반응모듈 내에서 휘발성 핵종은 열적으로 안정한 화합물로 전환된다. 얻어진 생성물은 붕규산 유리매질과의 반응을 통하여 Li는 Li3PO4의 형태로 유지되며 Cs 및 Sr은 유리매질내에 포용될 수 있다. 또한 sodium silicate, H3PO4 및 ZrCl4로 이루어진 물질계를 이용하여 내구성이 우수한 NZP 세라믹 고화매질을 합성하였다. 700℃ 이상에서 NZP 구조가 형성되며, Cs가 Li보다 우선하여 NZP 구조를 형성하였다. 이상의 결과로부터, GRSS를 이용한 폐용융염의 전처리는 단순한 공정과 열적안정성을 통하여 검증된 고화매질로 고형화가 가능토록하는 유효한 접근법이라 할 수 있으며, 수화학적 안정성의 검증을 통하여 ANL의 제올라이트를 이용한 고화법에 대한 대안이 될 것으로 기대된다.
영문 초록
This study suggested a new method for the solidification of molten salt waste generated from the electro-metallurgical process in the spent fuel treatment. Using binary material system, sodium silicate and phosphoric acid, metal chlorides were converted into metal phosphate in the microreaction module formed by SiO2 particles. The volatile element in the reaction module would little vaporized below 1100 ℃. After the gel product was mixed with borosilicate glass powder and thermally treated at 1000 ℃, Li exists as Li3PO4 separated from glass phase and, Cs and Sr would be incorporated into an amorphous phase from XRD analysis. In case of the addition of ZrCl4 to the binary system, the gel products were transformed into NZP structure considered as an prospective ceramic waste form after heat-treatment above 700 ℃. From these results, the gel-route pretreatment can be considered as an effective approach to the solidification of molten salt waste by the confirmed process or waste form and this also would be an alternative method on the ANL method using zeolites in USA by the confirmation of its chemical durability as an future work. confirmed process or waste form and this also would be an alternative method on the ANL method using zeolites in USA by the confirmation of its chemical durability as an future work.
목차
키워드
해당간행물 수록 논문
- Laser Ablation에 의한 고방사성시편의 미세영역 시료채취 장치개발
- 방사성폐기물 시료 중 241Am 과 244Cm의 정량
- A Study on the Performance of Pulse Jet Cleaning in High Temperature Filter
- CE형 원전의 격납건물내 중성자선량 평가
- Hot Cell 내의 고방사능 분진 제거를 위한 사이클론 적용 실험
- 원자력 발전소 배관재를 이용한 고온 수화학 조건에서의 방사화 부식생성물 모사에 관한 연구
- Ferrocyanide-음이온 교환수지에 의한 모의 토양제염 폐액 처리
- 방사성폐기물 중 129I 측정을 위한 시료의 전처리
- 겔화 전처리법을 이용한 폐용융염의 고형화
참고문헌
관련논문
공학 > 공학일반분야 BEST
- 중학생들의 인공지능 관련 사회-과학쟁점 토론에서 나타난 논증 특징과 인식
- 배터리전기차 화재대응방법 및 절차에 대한 제안
- 구조방정식 모형을 활용한 교과 문해력 함양과 복합양식 텍스트 독서 연구
공학 > 공학일반분야 NEW
- Sorption of Eu(III) Onto MX-80 and Granite in Ca-Na-Cl Solutions
- Comparison of Optimization Algorithms for Fracture Parameters Estimation of Spent Nuclear Fuel Cladding With Reoriented Hydride
- Investigation of the Effect of Wear and Oxidation on the Fatigue Strength Degradation of Zircaloy Cladding Tubes for Spent Nuclear Fuel
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!
