A Study on Multi-Layered EM Wave Absorber Using Natural Lacquer as a Binder

• 발행기관: 한국항해항만학회
• 저자명: Dong-Han Choi Dong-Il Kim Chang-Mook Choi Rui Li
• 간행물 정보: 『한국항해항만학회 학술대회논문집』2006년도 International Symposium on GPS/GNSS Vol.1, 1~5쪽, 전체 5쪽
• 주제분류: 공학 > 해양공학
• 파일형태: PDF
• 발행일자: 2006.10.24

영문 초록

Generally, a silicone rubber and a chlorinated polyethylene(CPE) have been used as a binder for the development of high-performance composite EM(Electro Magnetic) wave absorbers. In this paper, the EM wave absorption performance of natural lacquer, which is newly proposed as a binder was investigated. The prepared MnZn ferrite EM wave absorbers are mixed with natural lacquer showed excellent EM wave absorption characteristics compared with MnZn ferrite EM wave absorbers which are mixed with the conventional binders. MnZn ferrite EM wave absorbers mixed with natural lacquer were prepared and their absorption ability was also investigated. The EM wave absorbers are fabricated in different proportions of MnZn, or NiZn ferrite and natural lacquer, and their reflection coefficients are measured. The permittivity and permeability are calculated by using the measured reflection coefficients. The EM wave absorption abilities are calculated according to different thicknesses of the EM wave absorbers.

목차

1. Introduction

2. Natural Lacquer Features

3. Fabrication and Measurement of EM Wave Absorbers

4. Simulation and Measurement Results

5. Conclusion

키워드

CPE silicone rubber natural lacquer EM wave absorbers permittivity permeability