- 영문명
- Arrangement of Disposal Holes According to the Features of Groundwater Flow
- 발행기관
- 한국방사성폐기물학회
- 저자명
- 고낙열 백민훈
- 간행물 정보
- 『Journal of Nuclear Fuel Cycle and Waste Technology (JNFCWT)』Vol.14 No.4, 321~329쪽, 전체 9쪽
- 주제분류
- 공학 > 공학일반
- 파일형태
- 발행일자
- 2016.12.31
4,000원
구매일시로부터 72시간 이내에 다운로드 가능합니다.
이 학술논문 정보는 (주)교보문고와 각 발행기관 사이에 저작물 이용 계약이 체결된 것으로, 교보문고를 통해 제공되고 있습니다.

국문 초록
가상의 심층처분 부지의 지하수 유동 모의 결과를 통해 처분 심도에 위치하는 처분공 지점에서의 지하수 유동량 및 해당 지점에서 지표 환경까지 지하수가 유동하는 경로의 거리와 경로를 통과하는데 걸리는 시간에 대한 수량적, 공간적 분포를 분석하여 그 결과를 처분공의 위치 결정에 이용할 수 있는 방안을 제시하였다. 지하수 유동량은 처분공 위치에서 계산된 지하수위를, 유동 거리와 경과 시간은 입자 추적 기법(particle tracking)을 이용하여 계산하였다. 지하수 유동량 및 유동 거리와경과 시간의 공간적 분포를 이용하여 처분시설의 성능을 유지하는데 상대적으로 유리한 위치를 선별하고 특정한 제한 조건이 주어진 경우 제외되어야 하는 처분공 위치를 결정하여 처분공 배치에 이용할 수 있은 방안을 제시하였다. 또한 세 가지정보를 함께 고려하여, 추가적인 처분공의 위치를 선정할 필요가 있을 경우 보다 유리한 확장 방향을 제시할 수 있는 방안도논의되었다. 처분 심도에서의 지하수 유동 정보를 활용하여 처분공의 배치 방안을 결정하는 것은 처분시설의 성능 및 안전성 확보를 위해 기여할 수 있을 것으로 생각된다.
영문 초록
Based on the results of groundwater flow system modeling for a hypothetical deep geological repository site, quantitative and spatial distributions of groundwater flow rates at the positions of deposition holes, groundwater travel length and time from the positions to the surface environment were analyzed and used to suggest a method for determining locations of deposition holes.
The hydraulic head values at the depth of the deposition holes and a particle tracking method were used to calculate the groundwater flow rates and groundwater travel length and time, respectively. From the results, an approach to designing a layout of deposition holes was suggested by selecting relatively favorable positions for maintaining performance of the disposal facility and screening some positions of deposition holes that did not comply with specific constraints for the groundwater flow rates, travel length and time. In addition, a method for determining a geometrical direction for extension of the disposal facility was discussed. Designing the layout of deposition holes with the information of groundwater flow at the disposal depth can contribute to secure performance and safety of the disposal facility.
목차
키워드
해당간행물 수록 논문
- RESRAD-RECYCLE을 활용한 원전 해체 시 발생하는 금속폐기물의 자체처분 기준 적용 연구
- 지하수 유동 특성을 이용한 심층처분의 처분공 배치 방안
- 설계수명 이후 해체를 위한 금속 겸용용기의 방사화 특성 평가
- 고준위방사성폐기물 처분 Safety Case 개발을 통한 처분안전성 신뢰도 향상
- 경수로 사용후핵연료 건식저장을 위한 진공건조공정 개발
- 콘크리트의 감마선 차폐특성 및 압축강도에 대한 골재의 영향
- 원전 중대사고 연계 소외결말해석 전산체계에 대한 고찰
- 국내 유통중인 원료물질 및 공정부산물의 물리화학적 및 방사선적 특성데이터베이스 구축
- 우리나라 중・저준위 방사성폐기물 처분시설 종합개발계획(안)과 예비안전성평가
- 국내 경수로 사용후핵연료의 금속 겸용용기 장전을 위한 최소 냉각기간 평가
참고문헌
관련논문
공학 > 공학일반분야 BEST
- 중학생들의 인공지능 관련 사회-과학쟁점 토론에서 나타난 논증 특징과 인식
- 배터리전기차 화재대응방법 및 절차에 대한 제안
- 구조방정식 모형을 활용한 교과 문해력 함양과 복합양식 텍스트 독서 연구
공학 > 공학일반분야 NEW
- Sorption of Eu(III) Onto MX-80 and Granite in Ca-Na-Cl Solutions
- Comparison of Optimization Algorithms for Fracture Parameters Estimation of Spent Nuclear Fuel Cladding With Reoriented Hydride
- Investigation of the Effect of Wear and Oxidation on the Fatigue Strength Degradation of Zircaloy Cladding Tubes for Spent Nuclear Fuel
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!
