- 영문명
- Design and Fabrication of Triple Band WLAN Antenna with 900MHz and Wi-Fi 6E/7 Band
- 발행기관
- 한국전자통신학회
- 저자명
- 윤중한(Joong-Han Yoon)
- 간행물 정보
- 『한국전자통신학회 논문지』제20권 제3호, 473~480쪽, 전체 8쪽
- 주제분류
- 공학 > 전자/정보통신공학
- 파일형태
- 발행일자
- 2025.06.30

국문 초록
본 논문에서는 900 MHz 대역과 Wi-Fi 6E/7 대역을 포함한 삼중대역 WLAN 안테나를 제안하였다. 제안된 안테나는 사각 링 형상에 두 개의 스트립 선로를 적용하고 임피던스 매칭을 위해 접지면에 슬롯 그리고 사각 링 안에 스터브를 삽입하여 삼중대역에서 공진하도록 설계하였다. 전체 기판 크기는 66.0 mm(W)⨯52.0 mm(L)이며 두께(h) 1.0 mm, 그리고 비유전율이 4.4인 FR-4 기판 위에 54.0 mm⨯44.0 mm의 크기로 설계되었다. 제작 및 측정결과로부터, -10 dB 반사손실을 기준으로 900 MHz 대역에서는 37 MHz (0.913~950 GHz), 2.4 GHz 대역에서는 1,010 MHz(1.89~2.90 GHz), 그리고 5.0/6.0 GHz 대역에서는 2,610 MHz (4.98~7.59 GHz)의 대역폭을 얻었다. 또한 요구되는 삼중대역에서 이득과 방사패턴 특성을 측정하였다.
영문 초록
In this paper, we propose a triple band WLAN antenna with Wi-Fi 6E/7 and 900 MHz band. The proposed antenna is designed to resonate in a triple band by applying two strip lines in a square ring shape, inserting a slot in the ground plane and a stub inside the square ring for impedance matching. The antenna is designed with a size of 54.0 mm⨯44.0 mm on an FR-4 substrate with a thickness (h) of 1.0 mm and a relative permittivity of 4.4, and a size of 66.0 mm (W)⨯52.0 mm (L).. From the fabrication and measurement results, bandwidths of 37 MHz (0.913 to 0.950 GHz) for 900 MHz band, 1,010 MHz (1.89 to 2.90 GHz) for 2.4 GHz band and 2,610 MHz (4.98 to 7.59 GHz) for 5.0/6.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.
목차
Ⅰ. 서 론
Ⅱ. 제안된 안테나 구조
Ⅲ. 제작 및 측정결과
Ⅳ. 결 론
References
키워드
해당간행물 수록 논문
참고문헌
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!
