수치해석법을 활용한 압축부재 성능 해석의 가능성에 대한 연구

• 영문명: The study on the possibility of performance analysis for the compressive member using the numerical method
• 발행기관: 한국가구학회
• 저자명: 김광철(Gwang-Chul Kim)
• 간행물 정보: 『한국가구학회지』제21권 제1호, 26~40쪽, 전체 15쪽
• 주제분류: 예술체육 > 미술
• 파일형태: PDF
• 발행일자: 2010.01.30

영문 초록

This is a leading study to replace the structural analysis methodology on the specific traditional joint by a numerical analysis. Tests were carried out to test the compressive methodologies with the numerical results. The Japanese larch was used as a sample. The Orthotropic property of wood was specifically considered for the finite element numerical analysis. Linear numerical analysis and non-linear numerical analysis for the BEAM element and the two SOLID elements of ANSYS were used to analyze the compressive performance. In addition, more finely divided elements were used to raise the accuracy of the numerical result. Finally, the statistically significant differences were tested between that of the analytical and numerical results. It could be concluded that the SOLID 64 element shows the most optimum result when the non-linear analysis with the more finely divided element was used. However, finely dividing of the element is a considerable time consuming process, and it is quite difficult to raise the accuracy of the non-linear numerical analysis. Therefore, if considering the vertical displacement to be of the only interest, the BEAM element is more efficient than the SOLID element because the BEAM element is reflected as a simple line, which is less time consuming and difficult in dividing the elements. But, the BEAM element cannot accurately model the knot as a strength defect factor which is an important property in the orthotropic property of wood. Therefore, the SOLID element should be used to model the strength defect factor, knot, as it can be efficiently applied on the structural size flexure member which could be more strongly effected by the knot. In addition, it is useful at times when the failure types of members are to be more closely investigated, as the SOLID element is able to examine the local stress distribution of the member. The conclusion drawn by this study is of the good concordance between analytical results and numerical results of compressive wood members, but how orthotropic properties should only be considered. The numerical analysis on the specific Korean traditional joints will be based on the current study results.

목차

Ⅰ. 서론

Ⅱ. 재료 및 방법

Ⅲ. 결과 및 고찰

Ⅳ. 결론

참고문헌

키워드

BEAM element SOLID element linear numerical analysis non-linear numerical analysis