CNC선반 절삭에서 이송속도 및 절삭속도의 변화에 따른 재질별 표면조도에 관한 연구

• 영문명: A Study on the Surface Roughness by Material in CNC Lathe Cutting according to the Change in Feed Rate and Cutting Speed
• 발행기관: 한국산업기술융합학회(구. 산업기술교육훈련학회)
• 저자명: 윤경욱(Kyeong-Uk Yun)
• 간행물 정보: 『산업기술연구논문지』산업기술교육훈련논문지 제17권 4호, 275~282쪽, 전체 8쪽
• 주제분류: 공학 > 산업공학
• 파일형태: PDF
• 발행일자: 2012.12.30

영문 초록

This study has performed cutting tests by material to investigate the change in surface roughness of the workpiece given the change in the correlation between cutting speed and feed rate during CNC lathe cutting. In the test, SUM21, Al alloy 2024, and 6:4 brass was processed based on the cutting conditions of a regular work standard and then the changes in surface roughness based on Center Line Average (Ra) after increasing or decreasing cutting conditions was investigated. As a result, SUM21 generated the best Ra in 180m/min, 0.07mm/rev; Al alloy 2024 generated the best Ra in 400m/min, 0.07mm/rev; and 6:4 brass generated the best Ra in 220m/min, 0.07mm/rev. Furthermore, precise Ra was generated in general when feed rate was reduced while cutting speed was fixed; and all 3 materials generated poor Ra values when cutting speed and feed rate were raised simultaneously. When both cutting speed and feed rate were raised by 30%, there was no significant 6:4 brass Ra, 6.1% reduction only.

목차

Ⅰ. 서 론

Ⅱ. 실험 장치 및 방법

Ⅲ. 실험결과 및 고찰

Ⅳ. 결 론

키워드

Cutting Speed(절삭속도 m/min) Feed Rate(이송속도 mm/rev) Surface Roughness(표면 거칠기) CNC Lathe(CNC선반)