Submerged Arc Welding에서 용접조건에 따른 인장성 연구

• 영문명: Submerged Arc Welding of the Welding Conditions according to the Tensile Properties
• 발행기관: 한국산업기술융합학회(구. 산업기술교육훈련학회)
• 저자명: 백영창(Young-Chang Baek)
• 간행물 정보: 『산업기술연구논문지』산업기술교육훈련논문지 제17권 4호, 123~129쪽, 전체 7쪽
• 주제분류: 공학 > 산업공학
• 파일형태: PDF
• 발행일자: 2012.12.30

영문 초록

Weldments according to the welding conditions on changes in tensile strength is important to acquire more knowledge. Structural discontinuities such as joints and in part due to repeated loading and fatigue crack growth are more likely to crash, accident welding conditions depending on the skill of welders according to the strength of welds is true that a lot of factors that reduce a lot of research on this progress and form, but the geometry and load conditions due to the combined effects, including a lot of issues still remain to be solved in this study, the following facts. Weld butt weld material in the form 25V/340A 3.2t 4.5t is good and the tensile strength and tensile resistance, both in terms of bead formation 30V/320A condition was most excellent. Welding lap welding material in the form of 3.2t and 4.5t 31V/310A considered the most suitable 32V/320A the tensile strength and the bead width and the optimum conditions were determined to be appropriate. In lap welding gap 0, 0.5, 1mm in crease in tensile strength lowered significantly shape the gap so that there is no way to weld in a pressurized state optimum welding conditions can be viewed as substrate according to the thickness of the two kinds of Welded tensile strength in the thickness of the smaller side is the best way to weld.

목차

Ⅰ. 서 론

Ⅱ. 실험장치 및 방법

Ⅲ. 실험결과 및 고찰

Ⅳ. 결 론

키워드

Welding Conditions(용접조건) Structures(구조물) Tensile Strength(인장강도) Loadshape(하중형태) Butt Welding(맞대기 용접) Clearance(간극)