CO₂용접법에 적용되는 솔리드와이어와 플럭스코드와이어의 용접성에 관한 고찰

• 영문명: The Study on the Weldability of Solid Wired and Flux Cored Wire that Apply to CO2 Welding
• 발행기관: 한국산업기술융합학회(구. 산업기술교육훈련학회)
• 저자명: 문성훈(Seong-Hoon Moon)
• 간행물 정보: 『산업기술연구논문지』산업기술교육훈련논문지 제16권 3호, 185~192쪽, 전체 8쪽
• 주제분류: 공학 > 산업공학
• 파일형태: PDF
• 발행일자: 2011.09.30

영문 초록

This study focuses on the quality and speed of welding by using both solid wire and multi wire that applied to CO2 welding under the most suitable condition with SM390, or a hard material for welding structure, and in order to examine the mechanical characteristics, universal hardness tester and vickers tensile strength tester were used and derived from the following results. In the process of welding with a solid wire and flux cored wire, which used in CO2, Gas and Arc welding, FCAW could keep the comparatively high electricity density, and because the efficiency of its adherence, the speed of welding process can be faster. The flux cored wire of tensile load and hardness increases, and tension is almost same. CO2, Gas and Arc welding has a high mechanical hardness, thus, although it might be more expensive, because the flux cored wire is used for the essential material requiring high hardness, the increase in its quality can be expected.

목차

Ⅰ. 서 론

Ⅱ. 용접시험절차

Ⅲ. 실험방법

Ⅳ. 실험결과 및 고찰

Ⅴ. 결 론

키워드

Welding Condition(용접조건) Operative Weldability(용접성) Tensile Strength(인장강도) Hardness(경도) Elongation Percentage(연신율) Speed of Welding(용접속도)