- 영문명
- Characteristics of CO₂ Laser welded 1000 ㎫ Grade TRIP Steel
- 발행기관
- 한국레이저가공학회
- 저자명
- W.Q. Wang, C.Y. Kang(강정윤) T.K. Han(한태교) M.S. Kwon(권민석)
- 간행물 정보
- 『한국레이저가공학회 학술대회 논문집』2007년도 춘계학술발표대회 논문집, 57~60쪽, 전체 4쪽
- 주제분류
- 공학 > 기계공학
- 파일형태
- 발행일자
- 2007.06.30
국문 초록
영문 초록
Characteristics of CO₂ laser welded 1000 ㎫ grade Transformation Induced Plasticity steel were investigated under varying welding power, welding speed and different shield gas. Decreasing welding power, increasing welding speed or using mixed gas (Ar+He) reduced the porosity in the weld metal. Weld metal (WM) and HAZ near the WM had maximum hardness. In tensile strength test of load perpendicular to the weld axis, the specimens had same tensile properties as that of raw material. For the load parallel with the weld axis, the specimens prepared with Ar had equal yield strength (YS) and tensile strength (TS) to that of raw material. But the elongation was lower than that of raw material. The specimens prepared with He had higher YS, TS and lower elongation compared with that of raw material. Welded material had lower formability than that of the raw material. The formability of specimens prepared with low welding power or Ar+He was improved compared with that of specimens prepared using high power or Ar.
목차
ABSTRACT
1. Introduction
2. Experimental procedures
3. Results and Discussion
4. Conclusions
References
1. Introduction
2. Experimental procedures
3. Results and Discussion
4. Conclusions
References
해당간행물 수록 논문
참고문헌
최근 이용한 논문
교보eBook 첫 방문을 환영 합니다!
신규가입 혜택 지급이 완료 되었습니다.
바로 사용 가능한 교보e캐시 1,000원 (유효기간 7일)
지금 바로 교보eBook의 다양한 콘텐츠를 이용해 보세요!