가스난방기용 스월버너의 3차원 난류유동 특성에 관한 실험적 연구

• 영문명: An Experimental Study on the Three Dimensional Turbulent Flow Characteristics of Swirl Burner for Gas Furnace
• 발행기관: 군산대학교 수산과학연구소
• 저자명: 김장권(Jang-kweon Kim)
• 간행물 정보: 『군산대학교 수산과학연구소 연구논문집』제5집, 160~169쪽, 전체 10쪽
• 주제분류: 농수해양 > 수산학
• 파일형태: PDF
• 발행일자: 2004.07.03

영문 초록

This paper represents the vector fields. three dimensional mean velocities, the turbulent intensities, the turbulent kinetic energy. and the Reynolds shear stresses in the X- Y plane of gas swirl burner with a cone type baffle plate measured by using X-probe from hot-wire anemometer system. This experiment is carried out at now rates 350 and 450 ℓ /min respectively, which are equivalent to the combustion air now rate necessary for heat release 15.000 kcal/hr in gas furnace. in the test section of subsonic wind tunnel. The vector plot shows that the maximum axial mean velocity component exists in the narrow slits situated radially on the edge of gas swirl burner, for that reason, there is some entrainment phenomena of ambient air in the outer region of burner. Moreover, mean velocities in the initial region are largely distributed near the outer region of burner at Y/R ≒ 0.97, but they diffuse and develop into the center now region of burner according to the increase of axial distance. The turbulent intensities and the turbulent kinetic energy due to large inclination of mean velocity and swirl effect show that the maximum value in the initial region of burner is formed in the narrow slits situated radially on the edge of gas swirl burner and large values are mainly formed in the entire region of burner after X/R=2.4358, hence. the combustion reaction is anticipated to occur actively near this region. And the Reynolds shear stresses are also largely distributed from slits to vanes of gas swirl burner in the intial region. but their values largely disappear after X/R=3.2052.

목차

Abstract

1. 서론

2. 가스 스월 버너의 구조

3. 실험장치 및 방법

4. 실험결과 및 고찰

5. 결론

후기

참고문헌