Cold-Formed Steel Design

Wei-Wen Yu , Roger A. LaBoube , Helen Chen 지음

Wiley 2019년 09월 16일 출간

작품소개

책소개

Provides the latest AISI North American specifications for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American specification and 2015 North American framing standards, this all-new fifth edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, 5th Edition has been revised and reorganized to incorporate the Direct Strength Method. It discusses the reasons and justification for the various design provisions of the North American specification and framing design standards. It provides chapter coverage of: the types of steels and their most important mechanical properties; the fundamentals of buckling modes; commonly used terms; the design of flexural members, compression members and closed cylindrical tubes, and of beam columns using ASD, LRFD, and LSD methods; shear diaphragms and shell roof structures; standard corrugated sheets; and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standard Offers thorough coverage of ASD, LRFD, LSD, and DSM design methods Integrates DSM in the main body of design provisions Features a new section on Power-Actuated Fastener (PAF) Connections Provides new examples and explanations of design provisions Cold-Formed Steel Design, 5th Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construct

목차

Preface 1. Introduction 1.1 General Remarks 1.2 Types of Cold-Formed Steel Sections and Their Applications 1.3 Metal Buildings and Industrialized Housing 1.4 Methods of Forming 1.5 Research and Design Specifications 1.6 General Design Considerations of Cold-Formed Steel Construction 1.7 Economic Design and Optimum Properties 1.8 Design Basis 1.9 Serviceability 2. Materials Used in Cold-Formed Steel Construction 2.1 General Remarks 2.2 Yield Stress, Tensile Strength, and Stress-Strain Curve 2.3 Modulus of Elasticity, Tangent Modulus, and Shear Modulus 2.4 Ductility 2.5 Weldability 2.6 Fatigue Strength and Toughness 2.7 Influence of Cold Work on Mechanical Properties of Steel 2.8 Utilization of Cold Work of Forming 2.9 Effect of Temperature on Mechanical Properties of Steel 2.10 Testing of Full Sections and Flat Elements 2.11 Residual Stresses Due to Cold Forming 2.12 Effect of Strain Rate on Mechanical Properties 3. Strength of Thin Elements and Design Criteria 3.1 General Remarks 3.2 Definitions of Terms 3.3 Structural Behavior of Compression Elements and Effective Width Design Criteria 3.4 Perforated Elements and Members 3.5 Direct Strength Method and Consideration of Local and Distortional Buckling 3.6 Plate Buckling of Structural Shapes 3.7 Additional Information 4. Flexural Members 4.1 General Remarks 4.2 Bending Strength and Deflection 4.3 Design of Beam Webs 4.4 Bracing Requirements of Beams 4.5 Torsional Analysis of Beams and Combined Bending and Torsional Loading 4.6 Additional Information on Beams 5. Compression Members 5.1 General Remarks 5.2 Column Buckling

작가정보

저자(글) Wei-Wen Yu

WEI-WEN YU, PHD, PE, is Curators' Distinguished Professor Emeritus of Civil Engineering at Missouri University of Science and Technology and Founding Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures. He retired from the AISI Committee on Specifications in 2010 after 50 years of service. ROGER A. LABOUBE, PHD, PE, is Curators' Distinguished Teaching Professor Emeritus of Civil Engineering at Missouri University of Science and Technology and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures. Dr. LaBoube is also an active member of the AISI Committee on Specification and Committee on Framing Standards. HELEN CHEN, PHD, is the Manager of Construction Standards Development at the American Iron and Steel Institute (AISI), and oversees the Standards Council program responsible for developing and maintaining all AISI standards approved by the American National Standards Institute.

저자(글) Roger A. LaBoube

저자(글) Helen Chen

이 상품의 총서

전체선택