RF and Microwave Transistor Oscillator Design

Andrei Grebennikov 지음

Wiley 2007년 04월 30일 출간

작품소개

책소개

The increase of consumer electronics and communications applications using Radio Frequency (RF) and microwave circuits has implications for oscillator design. Applications working at higher frequencies and using novel technologies have led to a demand for more robust circuits with higher performance and functionality, but decreased costs, size and power consumption. As a result, there is also a need for more efficient oscillators.This book presents up to date information on all aspects of oscillator design, enabling a selection of the best oscillator topologies with optimized noise reduction and electrical performance. RF and Microwave Transistor Oscillator Design covers:analyses of non-linear circuit design methods including spectral-domain analysis, time-domain analysis and the quasilinear method;information on noise in oscillators including chapters on varactor and oscillator frequency tuning, CMOS voltage-controlled oscillators and wideband voltage-controlled oscillators;information on the stability of oscillations, with discussions on the stability of multi-resonant circuits and the phase plane method;optimized design and circuit techniques, beginning with the empirical and analytic design approaches, moving on to the high-efficiency design technique;general operation and design principles of oscillators, including a section on the historical aspects of oscillator configurations.A valuable reference for practising RF and Microwave designers and engineers, RF and Microwave Transistor Oscillator Design is also useful for lecturers, advanced students and research and design (RD) personnel.

목차

About the Author.Preface.Acknowledgements.1 Nonlinear circuit design methods.1.1 Spectral-domain analysis.1.2 Time-domain analysis.1.3 Newton&~Raphson algorithm.1.4 Quasilinear method.1.5 Van der Pol method.1.6 Computer-aided analysis and design.References.2 Oscillator operation and design principles.2.1 Steady-state operation mode.2.2 Start-up conditions.2.3 Oscillator configurations and historical aspects.2.4 Self-bias condition.2.5 Oscillator analysis using matrix techniques.2.6 Dual transistor oscillators.2.7 Transmission-line oscillator.2.8 Push&~push oscillator.2.9 Triple-push oscillator.2.10 Oscillator with delay line.References.3 Stability of self-oscillations.3.1 Negative-resistance oscillator circuits.3.2 General single-frequency stability condition.3.3 Single-resonant circuit oscillators.3.4 Double-resonant circuit oscillator.3.5 Stability of multi-resonant circuits.3.6 Phase plane method.3.7 Nyquist stability criterion.3.8 Start-up and stability.References.4 Optimum design and circuit technique.4.1 Empirical optimum design approach.4.2 Analytic optimum design approach.4.3 Parallel feedback oscillators.4.4 Series feedback bipolar oscillators.4.5 Series feedback MESFET oscillators.4.6 High-efficiency design technique.4.7 Practical oscillator schematics.References.5 Noise in oscillators.5.1 Noise figure.5.2 Flicker noise.5.3 Active device noise modelling.5.4 Oscillator noise spectrum: linear model.5.5 Oscillator noise spectrum: nonlinear model.5.6 Loaded quality factor.5.7 Amplitude-to-phase conversion.5.8 Oscillator pulling figure.References.6 Varactor and oscillator frequency tuning.6.1 Varactor modelling.6.2 Varactor nonlinearity.6.3 Frequency modulation.6.4 Anti-series varactor pair.6.5 Tuning linearity.

작가정보

저자(글) Andrei Grebennikov

저자 :

저자 :

저자 :

저자 :

저자 :
저자 :
저자 :
Andrei Grebennikov is a senior member if IEEE. His scientific and engineering activity includes the design and development of RF and microwave power amplifiers for different powers and bandwidths, single-frequency and voltage-controlled oscillators, modulators, mixers and multipliers using any types of bipolar and field-effect transistors. In addition to this, Andrei has experience reading lectures and classes in microwave RF engineering as well as training and technical presentations for RF design engineers.

이 상품의 총서

전체선택